Enter The Magos II

Well, here he is. Arch-Magos Cybernetica Braetalan'Kot. Finally got the paint finished up last week and some photos snapped over the weekend Thrilled with how he turned out. Not much else to say as now he needs his retinue. First up am working on his bodyguards - a Scyllax Automata Covenant known as The Arachnae. FW models and should fit in nicely aesthetically with the Arch-Magos. I enjoyed building him so much, I'm gonna build a few lesser models to fit in as his extended retine. Servitor or two and a few wee others.

Just a few photos eh ;) Hope you like him and cheers for looking in. C&C as ever more than welcome

Cheers

Stephen/'Jan'

Enter The Magos

2016 is here and it's time to get some hobby done. Been working on a kitbash/sculpt for an Atch Magos over the last few weeks but with Christmas and that, time has been a bit short. However, finally got the big fella finished....well the build anyways!! Greenstuff parts went on fairly smoothly - those cable rollers are bloody handy! The axe haft was a bit of a pain to imprint a texure pattern on but worked in the end. Pretty happy with the result; bits from about 7 different kits/models went into him. Have a wee guess and see if you can get which ones.
Anyways - here he is - Arch-Magos Braetalan'Kot of Achyls III. Cheers for looking. Paint will be going on as soon as!

AdMech Arch-Magos Braetalan'Kot

An Ork, A Hobbit and A Tech-Priest Walk Into A Bar........

The ork orders one ale, the hobbit does not, the tech-priest is confused o.O
Definitely funnier in my head ;)

Anyways - some finished stuff to pop up today. The Dominus/Castellax figs'n'vig are all done and I've also finally got the GW Bilbo fig and the AOBR Warboss all done for some folk over on DakkaDakka.
Warboss was a lot of fun as it was my first ever ork to paint (how the hell have I neever got 'round to painting an ork before??!!!). Gave me a good chance to play around with metals; weathering them and so on.
Bilbo is so tiny. When he first arrived, I took one look and wondered how the hell I was going to do him justice (beautiful sculpt btw) without obscurring the seriously fine detail. Really really REALLY thin layer was the answer to that one. His clothes took about 8 or 9 layers each to do but I think he worked out pretty well. The base is all GreenStuff. He's such a nice fig I thought he deserved a base that put him in context. I wanted to give him a little private moment as he stares and grins at the one true ring so I based him as if he's in his house surrounded by books and went with a darker palette to reflect the seriousness of the moment. Anyways there we are. Hope yez like them. C&C always welcome :D

Bilbo Baggins

 

AOBR Ork Warboss

 

 

 

 

AdMech Tech-Priest Dominus Lant Dor

 

 

AdMech Castellax Battle Automata - 'Delta-17-'LostChild'

 

 

 

Tech-Priest Dominus/Castellax Battle Automata Vignette

Of Knights and Men

On to what's on the painting mat at the mo. (And this is what my workplace is like....nah that's a bit of a lie....it's rarely this tidy lol)

After the wedding, I decided I needed a wee treat (hahahaaha) - still had a wee bit of savings left in my Irish account so a quick (online) trip to Orctown and that was that. Two antsy days later and my (2nd) favourite korean (after 'The Wife' of course ;) ) knocked on my door and delivered this......

The current Knight Warden kit and the new AdMech Tech-Priest Dominus and some sundry supplies incl the new leadbelcher spray. Lovely jubbly!!!!!
Now then - the Tech-Priest is a little on the pricey side.....W40,000 I think. Bloody clampack prices. Everything else (imho) GW does model wise is priced fine for what you get as far as I'm concerned. However, clampack figs take the piss somewhat. However.......the priest fig is GLORIOUS!! He's backbenched for now though.
And on the knight. This kit is huge!!! The 3 original large sprues plus the new upgrade sprue and it's all bloody lovely!!!
Have spent a fair bit of time on YouTube checking out the tuts there as from the start was intending to fully magnetise the bugger.
Getting the appropriate size of magnets over here in Korea (without having to spend a fortune or order from another country) has required a little shopping around and imagination. Here's where I am thus far....

      

 

 

Body and hip joint first. This joint is going to be bearing a lot of weight so I found these 20mm (I think) ND mags in the local Arts'n'Crafts store for the job. The mags have a hole throught he middle and one side is concave. Absolutely perfect for the pillar on the hip joint to fit into and get the full movement. These 20mms fit exactly into the bowl cap piece of the hip joint (forgot to take a photo of that) super glued them in place and then built up some green stuff around the one in the main body.

Works perfectly. The magnets are so strong that there is not slippage of movement when the model is assembled even with the full weapons loadout.

Arms and weapons took a little more time. Especially the upper arm pieces that fit onto the shoulder mounts. For these I had to first file off the ridge that would normally clip into the upper weapon housing and then carve down into the piece (didnt have a 6mm drillbit, so out came the carving tools. Obviously the weapon arms have a bit of weight to them so need a bigger magnet than the little 3mm ones I broght back from Ireland with with me. Looked everywhere......nothing.......until........I found these fridge type magets with 6mm ND inside them. Bought a few packs of those and hacked them apart back at home!! Fitted all the arm and weapons out with 6mm mags and sealed them in with GS and somtimes a bit of cut down sprue as well (the well inside a few of the weapons is pretty deep). Anyways that's the weapons all done and interchangeable. They all fit really snuggly and the 6mm mags are pretty strong so again no slippage. Theonly tricky bit was the carving out of the upper arm pieces. BE CAREFUL or you could ass the whole piece up.

Did manage to give the wee 3mm mags some love though. The 2 carapace weapons are maglocked using 3mm pairs (2 in the weapon and 2 drilled into the hole on the carapace) I also decided to make the face plates interchangeable too. This was more to fit the fluff I'm making for this knight; I want him to have his original imperial knight's house face plate and then a 'vengeance mask' which was gifted to him by an AdMech forge world.......more on that fluff stuff later, laaaattter!!! The masks are fitted using the wee 3mm mags. Simple enough to do.

And so......all the pieces are now cleaned, trimmed, filed, smoothed and magged. Next came priming and basecoating........No way in the warp was I going to be basecoating this monster by brush!!!!  Primed everything with a light coat of Chaos Black spray and then got busy with the new Leadbelcher spray. Was a little nervous as the Skull White spray can be ........odd at times and hadn't heard anything about how the LB spray behaved. But it went on as smooth as silk. beautiful coat. I will say though that the LB spray is somewhat lighter and shinier than the LB paint from a pot.....not by much though, but it sure is quite silvery shiiinny (oh, Shiny!!) I also coated the outside of the armour plates with the Skull White spray, which decided that today was the day that it was going to go on smooth and silky (relief). So, the whole bugger is now primed and basecoated and ready for paint..........well, after I get these DV Chosen and their dio finished up for this month's DakkaDakka competion!!!!!

Anyways, that's where the new Knight is at. The magnetising wasn't that much of a bitch at all and has come together really solidly - no disco wobble at all!! Any questions or anything about the build - just drop me a line in the comments

Cheers

Irish